Installation Procedure
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Install the trim panel and secure with the trim panel screws.
Tighten: Tighten the screws to 2.5 N.m (22 lb in).
- Position the outboard recliner trim cover on the seat and secure with the trim cover screws.
Tighten: Tighten the screws to 2.5 N.m (22 lb in).
- Install the front seat. Refer to Front Seat Replacement - Bucket .
NOTE:
Refer to Fastener Notice
.