LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1502 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Driver Seat Recliner Handle and Passenger Seat Recliner Handle Replacement (Non-Fold Flat) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Recliner Handle Bolt & Spring
    GM986806Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Position the recliner handle to the adjuster with the fastener and the spring. Secure the handle in place with the recliner handle bolt.

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

    2. Fig 2: View Of Seat Cushion Outer Trim Panel - Front Seat (4-Way)
    GM981027Courtesy of GENERAL MOTORS CORP.
  2. Position the outer trim panel to the seat cushion. Secure the trim panel with the screws.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb in).

    3. Fig 3: Recliner Handle Trim
    GM981017Courtesy of GENERAL MOTORS CORP.
  3. Install the recliner handle trim.
    4. Fig 4: Seat Riser Handle Trim
    GM981011Courtesy of GENERAL MOTORS CORP.
  4. Install the seat riser handle trim.
  5. Install the front seat. Refer to Front Seat Replacement - Bucket .
scientia non olet · About LEMON Manuals