LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1497 (Frame And Underbody) >> Repair Instructions >> Tow Hook Replacement (15 Series) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the tow hook to the frame rail.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the bolts to the tow hook through the frame rail.

    Tighten 

    Tighten the bolts to 85 N.m (63 lb ft).

  3. Install the front bumper. Refer to BUMPER REPLACEMENT-FRONT (OLD STYLE) or BUMPER REPLACEMENT-FRONT (NEW STYLE GMC) or BUMPER REPLACEMENT - FRONT (NEW STYLE CHEVROLET) .
    Fig 1: Installing Tow Hook To Frame Rail
    G03382368Courtesy of GENERAL MOTORS CORP.