LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (Supplemental Inflatable Restraint System) >> Diagnostic Tests >> DTC B1000: Internal SDM Failure >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2002 Buick Park Avenue. However, it is still accessible from the selected car via links, so may be relevant.
  1. If SIR diagnostic system check has been performed, go to next step. If SIR diagnostic system check has not been performed, go to SIR DIAGNOSTIC SYSTEM CHECK .
  2. Connect scan tool to Data Link Connector (DLC), located under left side of instrument panel. Turn ignition on. Using scan tool, request SIR DTC display. If DTC B1000 is retrieved as a current DTC, go to next step. If DTC B1000 is retrieved as a history DTC, go to DIAGNOSTIC AIDS .
  3. Replace SDM. See SENSING & DIAGNOSTIC MODULE (SDM)  under REMOVAL & INSTALLATION. Reconnect all SIR components. Go to next step.
  4. Using scan tool, erase DTC's. Road test vehicle, then, check for DTC's. IF DTC B1000 is retrieved by scan tool, go to step  2. If DTC B1000 is not retrieved, system is normal. Go to SIR DIAGNOSTIC SYSTEM CHECK .