LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1459 (Automatic Transaxle - AF33-5 (Removal & Installation, Service & Overhaul)) >> Repair Instructions >> Rear Control Valve Body Disassemble

Rear Control Valve Body Disassemble

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Spacer Plate & Gasket Assembly & Rear Control Valve Body Assembly
    GM749784Courtesy of GENERAL MOTORS CORP.
    CAUTION: Valve springs can be tightly compressed. Use care when removing retainers and plugs. Personal injury could result.
  1. Remove the spacer plate and gasket assembly (324) from the rear control valve body assembly (326).
  2. Fig 2: View Of Rear Valve Body Cover Plate
    GM767415Courtesy of GENERAL MOTORS CORP.
  3. Remove the 7 rear valve body cover plate bolts (421).
  4. Remove the rear valve body cover plate (420).
  5. Remove the rear valve body cover plate gasket (419).
  6. Fig 3: View Of Secondary Regulator Valve
    GM767408Courtesy of GENERAL MOTORS CORP.
  7. Remove the secondary regulator valve spring (437).
  8. Remove the secondary regulator valve (436).
  9. Fig 4: View Of Line Pressure Control (SLT) Accumulator Piston & Springs
    GM767410Courtesy of GENERAL MOTORS CORP.
  10. Remove the line pressure control (SLT) accumulator piston spring - inner (435).
  11. Remove the line pressure control (SLT) accumulator piston spring - outer (434).
  12. Remove the line pressure control (SLT) accumulator piston (433).
  13. Fig 5: Exploded View Of Shift Pressure Control Valve Assembly
    GM767413Courtesy of GENERAL MOTORS CORP.
  14. Remove the shift pressure control valve plunger sleeve (432).
  15. Remove the shift pressure control valve plunger (431).
  16. Remove the shift pressure control valve (430).
  17. Remove the shift pressure control valve spring (429).
  18. Remove the shift pressure control valve sleeve (428).
  19. Fig 6: View Of M2 Shift Valve
    GM767416Courtesy of GENERAL MOTORS CORP.
  20. Remove the M2 shift valve spring (427).
  21. Remove the M2 shift valve (426).
  22. Fig 7: View Of Shift Pressure Relay Valve
    GM767419Courtesy of GENERAL MOTORS CORP.
  23. Remove the shift pressure relay valve spring (425).
  24. Remove the shift pressure relay valve (424).
  25. Fig 8: View Of 3rd Gear Band (B4) Control Valve
    GM767425Courtesy of GENERAL MOTORS CORP.
  26. Remove the third gear band (B4) control valve (423).
  27. Remove the third gear band (B4) control valve spring (422).
  28. Fig 9: View Of Rear Valve Body Cover Plate
    GM767426Courtesy of GENERAL MOTORS CORP.
  29. Remove the 2 rear valve body cover plate bolts (416).
  30. Remove the rear valve body cover plate (417).
  31. Remove the rear valve body cover plate gasket (418).
  32. Fig 10: Exploded View Of Lock Up Relay Valve Assembly
    GM767429Courtesy of GENERAL MOTORS CORP.
  33. Remove the lock up relay control valve sleeve (412).
  34. Remove the lock up relay control valve plunger (413).
  35. Remove the lock up relay valve spring (414).
  36. Remove the lock up relay valve (415).
  37. Fig 11: View Of 1-2 Reverse Clutch (B5) Control Valve
    GM767430Courtesy of GENERAL MOTORS CORP.
  38. Remove the 1-2 reverse clutch (B5) control valve (411).