Park/Neutral Position Switch Removal

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Bending Tabs From Park/Neutral Position Switch Lock Tab Washer

Courtesy of GENERAL MOTORS CORP.

Using a screwdriver, bend any tabs from the park/neutral position switch lock tab washer down from the park neutral position switch nut.

Fig 2: View Of Flat Washer, Lock Washer & Manual Shaft Nut

Courtesy of GENERAL MOTORS CORP.

Remove the park/neutral position switch nut (78), lock tab washer (77) and flat washer (74).

Fig 3: View Of Park/Neutral Position Switch & Bolt

Courtesy of GENERAL MOTORS CORP.

Remove the park/neutral position switch bolt (79), stud (76) and flat washers (69).
Remove the park/neutral start position switch (75).