Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Fluid Level Indicator Assembly

Courtesy of GENERAL MOTORS CORP.

Install the transaxle fluid level indicator assembly onto the vehicle.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the transaxle fluid level indicator fastener onto the transaxle.
Tighten: Tighten the transaxle fluid level indicator fastener to 12 N.m (9 lb ft).
Place the hole of the fuel injector sight shield onto the oil fill neck of the valve rocker arm cover.
Install the oil fill tube and the oil fill cap.