Diagnostic Procedure
WARNING: This page is about a different car, the 2002 GMC Savana and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
- If SIR Diagnostic System Check has been performed, go to next step. If SIR Diagnostic System Check has not been performed, go to SIR DIAGNOSTIC SYSTEM CHECK .
- Using scan tool, request SIR DTC display. If DTC B1000 is retrieved as both a current and history DTC, go to next step. If DTC B1000 is not retrieved as both a current and history DTC, go to DIAGNOSTIC AIDS .
- Replace SDM. See SENSING & DIAGNOSTIC MODULE (SDM) under REMOVAL & INSTALLATION. Go to next step.
- Reconnect all SIR components. Ensure all components are properly mounted. Using scan tool, clear all SIR DTC's. Road test vehicle. If DTC resets, go to step 2. If DTC does not reset, system is normal.