Stripe or Decal Removal
WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the following components:
- Necessary moldings or trim panel
- Molding attaching clips
- Handles
- Sidemarker lamps
- Other stripe or decal overlapping parts
- Clean the following areas as needed:
- The repair surfaces
- The adjacent panels
- The openings
- Use 3M Scotch Brite molding adhesive remover disk 3M P/N 07502 or equivalent to remove the stripe or decal from the body panel.
- Use Varnish Makers and Painters (VM & P) naphtha in order to remove all traces of adhesive residue from the painted surfaces.