LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1432 (Bumpers) >> Repair Instructions >> Energy Absorber Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear bumper energy absorber to the rear bumper impact bar.
    IMPORTANT: Route the tail lamp wiring through the cutout in the rear bumper energy absorber.
  2. Install the push-in retainers to the rear bumper energy absorber.
  3. Install the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper .
    Fig 1: Rear Bumper Energy Absorber
    G01616857Courtesy of GENERAL MOTORS CORP.