Installation Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Install the mode actuator (1) to the vehicle.
- Install the screws to the mode actuator (1).
Tighten: Tighten the screws to 1.6 N.m (14 lb in).
- Connect the electrical connector to the mode actuator.
- Install the right rear quarter trim panel. Refer to TRIM PANEL REPLACEMENT - REAR QUARTER - RIGHT (UTILITY) or TRIM PANEL REPLACEMENT - REAR QUARTER - RIGHT (SUBURBAN) .
NOTE:
Refer to FASTENER NOTICE
.