Removal Procedure
WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rear door trim panel.
- Remove the rear door inner energy absorber pad. Refer to Energy Absorber Pad Replacement - Inner Rear .
- Remove the rear door water deflector. Refer to Water Deflector Replacement - Rear Door .
- Remove the rear door outer energy absorber pad. Refer to Energy Absorber Pad Replacement - Outer Rear .
- Remove the rear door inner window sealing strip. Refer to Sealing Strip Replacement - Rear Door Window Belt Inner .
- Remove the rear door stationary window molding. Refer to Window Molding Replacement - Rear Door Stationary .
- Remove the rear door frame applique. Refer to Door Frame Applique Replacement - Rear .
- Remove the rear door window. Refer to Window Replacement - Rear Door .
- Remove the rear door outside door handle. Refer to Door Handle Replacement - Rear Outside .
- Remove the rear door inside door handle. Refer to Door Handle Replacement - Rear Inside .
- Remove the rear door lock. Refer to Lock Replacement - Rear Door .
- Remove the rear door window weatherstrip. Refer to Weatherstrip Replacement - Rear Door Window .
- Remove the rear door window regulator. Refer to Window Regulator Replacement - Rear Door .
- Disconnect the wiring harness.
- Remove the rear door bottom auxiliary sealing strip. Refer to Sealing Strip Replacement - Rear Door Bottom Auxiliary .
- Remove the rear door rubber conduit. Refer to Rubber Conduit Replacement - Rear Door .
- Remove the rear door side molding. Refer to MOLDING REPLACEMENT -- BODY SIDE .
- Remove the rear door lower finish panel. Refer to FINISH PANEL REPLACEMENT -- DOOR LOWER .
- Support the rear door.
- Remove the intermediate rear door hinge bolts.
- Remove the rear door, with an assistant.