LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 142 (Supplemental Inflatable Restraint System) >> Removal & Installation >> Sensing & Diagnostic Module (SDM) >> Removal

Sensing & Diagnostic Module (SDM): Removal

WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM .
  2. Remove driver's seat. Remove carpet retaining sill trim molding. Fold back carpet to access SDM. Remove Connector Position Assurance (CPA) clip and disconnect SDM harness connector from SDM. See Figure. Remove SDM mounting nuts. Remove SDM.
scientia non olet · About LEMON Manuals