Removal Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the 2 inboard fasteners from the luggage carrier base covers.
- Remove the base covers.
- Remove the fasteners from the front bases.
- Remove the fasteners (1) from each side of the rear base.
- Remove the roller bar/rear cross rail assembly (3) from the vehicle.
- Remove the fasteners (4) from the side rail/rear base.
- With an assistant, pull gently back on the carrier (1) in order to release the carrier from the supports.
- With an assistant, lift the carrier assembly up and off the vehicle.
- Remove the fasteners from the center supports.
- Remove the center supports with pads from the vehicle.
- Remove the rear base fasteners (2) from the vehicle.
- Remove the rear bases with pads from the vehicle.