Installation Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Install the side rail assemblies (1) to the roof and align to the existing Welnuts.
- Install the retainers to the side rails and hand tighten.
- Torque the side rail retainers in this order.
Tighten: Tighten the side rail retainers to 2 N.m (20 lb in).
- Torque the second hole from the front.
- Torque the first hole.
- Torque the third and forth holes.
- Install the front cross rail assembly (2) to the side rails (1), stopping at the second or third notch from the front of each rail.
- Depress the adjuster handles to lock each side.
- Install the rear cross rail to the side rails, stopping at the second or third engagement notch.
- Depress the adjuster handle to lock each side.
- Install the rear rail covers (2) by inserting the legs of the cover and rotating cover down to engage the retainer.
NOTE:
Refer to FASTENER NOTICE
.