LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1415 (Stationary Window System) >> Repair Instructions >> Windshield Side Reveal Molding Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the windshield reveal molding to the windshield pillar.
    2. NOTE: Refer to FASTENER NOTICE .
    Fig 1: Identifying Windshield Reveal Molding Screws
    GM301107Courtesy of GENERAL MOTORS CORP.
  2. Install the screws to the windshield reveal molding.

    Tighten:  Tighten the screws to the windshield reveal molding to 2 N.m (18 lb in).

    3. Fig 2: View Of Front Door Sealing Weatherstrip
    GM441415Courtesy of GENERAL MOTORS CORP.
  3. Install the front door sealing weatherstrip (1) to the pinch-weld.
  4. Close the door.
scientia non olet · About LEMON Manuals