LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (Engine Controls - Removal, Overhaul & Installation) >> Emission Systems & Sub-Systems >> EVAP Purge Solenoid >> Removal (3.0L)

Removal (3.0L)

WARNING: This page is about a different car, the 2002 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn OFF the ignition. Loosen clamp at air cleaner assembly and throttle body assembly. Remove attachment bolts from outlet resonator/duct assembly to support bracket. Remove outlet resonator/duct assembly. See Figure . Disconnect EVAP purge solenoid harness connector. See Figure .
  2. Disconnect EVAP purge line quick-connect between the EVAP purge solenoid and EVAP service port. Release by pressing the release tab to the left then upward while pulling the two lines apart. Remove the EVAP purge solenoid and line assembly from the solenoid attachment grommet and V-clamp. Remove EVAP purge solenoid manifold vacuum supply hose and remove solenoid and line assembly.
scientia non olet · About LEMON Manuals