LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1401 (Engine Mechanical - 3.8L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Piston and Connecting Rod Disassemble

Piston and Connecting Rod Disassemble

WARNING: This page is about a different car, the 2003 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Handle the piston carefully. Worn piston rings are sharp and may cause bodily injury.
  1. Remove the piston rings. Use a suitable tool to expand the rings. Piston rings must not be reused.
    Fig 1: Removing Piston Rings
    G01969392Courtesy of GENERAL MOTORS CORP.
    NOTE: When removing or installing the piston pin retainer and piston pin do not damage the piston or the retaining groove in the piston. Damage to the piston or retaining groove can lead to severe engine damage.
  2. Remove the piston pin retaining clips.
  3. Remove the piston pin.
    Fig 2: Removing Piston Pin & Retaining Clips
    G01969393Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals