LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1400 (Engine Mechanical - 3.1L V6 - VIN (J)) >> Repair Instructions >> On-Vehicle repair Instructions >> Oil Pump Drive Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper intake manifold. Refer to INTAKE MANIFOLD REPLACEMENT - UPPER  .
  2. Remove the fuel pipe clip bolt and the clip.
    Fig 1: Removing Fuel Pipe Clip Bolt And Clip
    G01967930Courtesy of GENERAL MOTORS CORP.
  3. Remove the fuel feed and the fuel return pipes from the fuel injector rail. Refer to FUEL RAIL & INJECTORS in Removal & Installation.
  4. Remove the oil pump drive bolt.
    Fig 2: Removing Oil Pump Drive, Bolt & Clamp
    G01967931Courtesy of GENERAL MOTORS CORP.
  5. Remove the oil pump drive clamp.
  6. Remove the oil pump drive.
  7. Remove the oil pump drive seal.
scientia non olet · About LEMON Manuals