LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1400 (Engine Mechanical - 3.1L V6 - VIN (J)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Valve Lifter Installation

Valve Lifter Installation

WARNING: This page is about a different car, the 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Coat the valve lifters using prelube GM P/N United States 1052367, (GM P/N Canada 992869) or the equivalent.
  2. Install the valve lifters in their original locations.
  3. Apply threadlock GM P/N United States 12345382, (GM P/N Canada 10953489) or the equivalent to the threads.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  4. Install the valve lifter guides and guide bolts.

    Tighten 

    Tighten the valve lifter guide bolts to 10 N.m (89 lb in).

    Fig 1: Installing Valve Lifter & Guides
    G01968209Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals