Rear Brake Caliper: Installation
WARNING: This page does not describe the selected car, but rather 46 other vehicles, including the 2001 Pontiac Montana, 2001 Pontiac Aztek, 2001 Oldsmobile Silhouette, 2001 Oldsmobile Bravada, and 2001 GMC Sonoma. However, it is still accessible from the selected car via links, so may be relevant.
To install, reverse removal procedure. Lubricate caliper guide pin bolts with silicon lubricant. Tighten all nuts and bolts to specification. See TORQUE SPECIFICATIONS . Bleed brake system. See MANUAL BLEEDING or PRESSURE BLEEDING .