Dual Zone Operation
The right air temperature allows the passenger to offset air discharge temperatures on the right side of the vehicle by 3°C (6°F). To activate the dual zone, the passenger pushes the DUAL button so that the indicator light is lit. Press the right arrow button or left arrow button to the desired offset. The switch assembly has LED's that will illuminate in order to inform the passenger of the temperature offset. The temperature offset is allowed as long as the driver's set temperature is not in the maximum hot or cold settings. The display will not show the passenger temperature selection.
The HVAC control module will position the right air temperature actuator, located on the right side of the HVAC module to a position to divert sufficient air past the heater core to achieve the desired passenger temperature.