Installation Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Install the information center telltale assembly to the garnish molding.
- Install the retaining screws (1).
Tighten: Tighten the retaining screws to 2 N.m (18 lb in).
- Install the rear quarter garnish molding. Refer to GARNISH MOLDING REPLACEMENT - REAR CORNER .
NOTE:
Refer to FASTENER NOTICE
.