LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1380 (Body Front End) >> Repair Instructions >> Hood Link Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.
  1. Raise and support the front of the hood (1).
  2. Remove the bolts (7) holding the hood link assembly to the hood hinge.
  3. Remove the bolts (5) holding the hood link assembly to the fender.
  4. Remove the hood link assembly from the vehicle.
    Fig 1: Removing Hood Link
    G01578899Courtesy of GENERAL MOTORS CORP.