LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (Engine Controls - Removal, Overhaul & Installation - 6.5L Diesel) >> Engine Sensors & Switches >> Intake Air Temperature Sensor >> Removal & Installation

Removal & Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, 2002 GMC C3500 HD, and 2002 Chevrolet RV Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

On vans, remove the engine cover. See ENGINE COVER . On all models, remove the electrical connector from Intake Air Temperature (IAT) sensor by releasing the locking tab. Remove the IAT sensor. To install, reverse removal procedure. Tighten fasteners properly. See TORQUE SPECIFICATIONS .