LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1371 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Switch Replacement - Hot and Cold Cupholder >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the new switch until the tabs (1) clicks in place.

    Ensure the red light is pointing rearward of the vehicle.

    Fig 1: Installing New Switch
    G01579444Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connectors.
  3. Install the cupholder assembly to the console. Refer to Cupholder Replacement (Luxury)   or  Cupholder Replacement (Non-Luxury)   or  Cupholder Replacement (Rear)   or  Cupholder Replacement (Pro)   . 
    Fig 2: Connecting Electrical Connectors
    G01579445Courtesy of GENERAL MOTORS CORP.