LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1371 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Bezel Replacement - Instrument Panel (I/P) Cluster >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply the parking brake to prevent the vehicle from moving.
  2. If equipped with an automatic transmission, move the shift lever all the way down to last gear.
  3. Tilt the steering wheel to the full down position.
  4. Pull gently rearward on the corners of the bezel from the instrument panel (IP) assembly.
  5. Remove the bezel.
    Fig 1: Instrument Panel (I/P) Cluster Bezel
    G01579415Courtesy of GENERAL MOTORS CORP.