LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1371 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Bezel Replacement - Floor Console (Non-Lux Lower) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cluster bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster   . 
  2. Remove the upper bezel by inserting a flat bladed tool between the console and bezel.
    Fig 1: Removing Upper Bezel
    G01579496Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the wire connectors.
  4. Remove the storage bin. Refer to Console Storage Bin Replacement (Expect Pro)   or Console Storage Bin Replacement (Pro)   . 
    Fig 2: Disconnecting Wire Connectors
    G01579497Courtesy of GENERAL MOTORS CORP.
  5. Insert a flat bladed tool between the console and bezel in order to pry it out.
  6. Remove the bezel from the console.
    Fig 3: Removing Bezel From Console
    G01579498Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals