Removal & Installation (8.1L)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, 2002 Chevrolet RV Cutaway, and 2002 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect negative battery cable. Disconnect electrical connectors from ignition coils. Remove spark plug wires from ignition coils. Remove studs attaching ignition coil bracket to valve cover. Remove ignition coil bracket. To install, reverse removal procedure. Tighten ignition coil bracket studs to specification. See TORQUE SPECIFICATIONS .