EVAP Canister Vent Valve Removal & Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, 2002 Chevrolet RV Cutaway, and 2002 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Raise the vehicle. Disconnect the electrical connector from the EVAP vent valve. Disconnect the canister vent hose. Bend back the tang on the bracket.
- Slide the EVAP vent valve off the bracket. To install, reverse removal procedure.