LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1361 (Automatic Transmission - 4L80-E - Service & Replacement) >> Repair Instructions >> Accumulator Housing Replacement >> Third and Fourth Clutch Accumulator Assembly

Third and Fourth Clutch Accumulator Assembly

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the 3rd clutch accumulator piston inner (3) and outer (1) seals. Lubricate the 3rd clutch accumulator piston seals (1,3) with DEXRON® III automatic transmission fluid.
  2. Install the 3rd clutch accumulator piston (2).
    Fig 1: Installing 3rd Clutch Accumulator Piston Inner & Outer Seals
    G01952386Courtesy of GENERAL MOTORS CORP.
  3. Install the 4th clutch accumulator piston seal (3). Lubricate the 4th clutch accumulator piston seal (3) with DEXRON® III automatic transmission fluid.
  4. Assemble the 4th clutch accumulator piston pin (2) with the 4th clutch accumulator piston pin(4).
  5. Install the 4th clutch accumulator piston assembly into the accumulator housing (1).
  6. Install the 4th clutch accumulator piston pin retainer ring (5) onto the 4th clutch accumulator piston pin (2).
    Fig 2: Installing 4th Clutch Accumulator Piston & Seal
    G01952387Courtesy of GENERAL MOTORS CORP.