Removal Procedure
WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Broken or deteriorated mounts can cause misalignment and destruction of certain drive train components. When a single mount breaks, the remaining mounts are subjected to abnormally high stresses.
- Raise and suitably support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
- Remove the transmission mount to crossmember nut.
- Remove the transmission mount to transmission bolts.
- Raise the transmission just enough, in order to permit removal of the mount using a suitable transmission jack.
- Remove the transmission mount.