LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1349 (Transfer Case - NVG 246-NP8 (Two Speed Automatic)) >> Repair Instructions >> Transfer Case Shift Control Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the shift control module to the bracket.
    Fig 1: Shift Control Module
    G01481184Courtesy of GENERAL MOTORS CORP.
  2. Connect the shift control module electrical connectors.
  3. Start the engine and test the automatic transfer case system for proper shift operation.
    Fig 2: Shift Control Module Electrical Connectors
    G01481185Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals