LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1348 (Transfer Case - NVG 149-NP (One Speed Automatic)) >> Repair Instructions >> Transfer Case Input Shaft Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra and 2003 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transfer case. Refer to Transfer Case Assembly Replacement .
  2. Remove the input shaft seal, using a flat-tipped screwdriver.
    Fig 1: Removing Transfer Case Input Shaft Seal
    G01481051Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals