LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1348 (Transfer Case - NVG 149-NP (One Speed Automatic)) >> Repair Instructions >> Transfer Case Fluid Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra and 2003 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: When performing the following procedure, use only hand tools to remove and install the drain and fill plugs.
  1. Raise and suitably support the vehicle. Refer to JACKING AND LIFTING .
  2. Remove the transfer case shield, if equipped. Refer to Transfer Case Shield Replacement .
  3. Remove the fill plug.
    Fig 1: Fill Plug
    G01481019Courtesy of GENERAL MOTORS CORP.
  4. Remove the drain plug.
    IMPORTANT: Ensure that an approved drain pan is used when draining the transfer case.
  5. Allow the transfer case to drain completely.
    Fig 2: Drain Plug
    G01481020Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals