Tools Required
WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- J 8092 Universal Driver Handle - 3/4 in - 10
- J 21128 Axle Pinion Oil Seal Installer (8.6 inch Axle)
- J 23690 Axle Shaft Bearing Installer (8.6 inch Axle)
- J 2619-01 Slide Hammer
- J 29709 Wheel Bearing Installer (9.5 inch Axle)
- J 29712 Wheel Bearing Remover (9.5 inch Axle)
- J 29713 Axle Seal Installer (9.5 inch Axle)
- J 44685 Rear Axle Seal and Bearing Remover (8.6 inch Axle)