LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1347 (Rear Drive Axle) >> Repair Instructions >> Rear Axle Housing Cover and Gasket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Refer to JACKING AND LIFTING .
  2. Drain the rear axle. Refer to Lubricant Replacement - Rear Drive Axle (8.6 Inch Axle)  or Lubricant Replacement - Rear Drive Axle (9.5, 10.5, and 11.5 Inch Axles)  or Lubricant Replacement - Rear Drive Axle (9.75 Inch Axle) .
  3. Remove the rear axle housing cover bolts (1).

    Discard the rear axle housing cover bolts.

  4. Remove the rear axle housing cover (2) from the axle housing.
  1. 4.1. Catch the oil in a drain pan.
  2. 4.2. Remove any gasket material from the rear axle housing and/or the rear axle housing cover.
Fig 1: Rear Axle Housing Cover & Bolts
G01480619Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals