LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1346 (Front Drive Axle) >> Repair Instructions >> Clutch Shaft Bearing Replacement - Front Drive Axle >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the inner axle shaft and housing assembly. Refer to Inner Shaft and/or Housing Replacement - Front Drive Axle (8.25 S4WD and 9.25 Axles)  or Inner Shaft and/or Housing Replacement - Front Drive Axle (8.25 F4WD Axle) .
  2. Remove the clutch shaft from the differential carrier assembly.
  3. Remove the clutch shaft pilot bearing using the J 34011. 
Fig 1: Remove Clutch Shaft
G01480409Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals