LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1340 (Power Steering System) >> Repair Instructions >> Power Steering Cooler Pipe/Hose Replacement (Rack and Pinion) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper grille baffle.
  2. Remove the front grille. Refer to GRILLE REPLACEMENT (OLD STYLE)  or GRILLE REPLACEMENT (NEW STYLE GMC)  or GRILLE REPLACEMENT (NEW STYLE CHEVROLET)  .
    Fig 1: Removing Upper Grille Baffle
    G01479534Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to POWER STEERING HOSE DISCONNECTED NOTICE .
  3. Remove the power steering outlet hose (4) from the power steering gear (3).
  4. Remove the power steering inlet hose from the power steering pump (1).
    5. Fig 2: Removing Power Steering Outlet Hose & Inlet Hose
    G01479535Courtesy of GENERAL MOTORS CORP.
  5. Remove the bolts (2) retaining the cooler to the radiator support.
  6. Remove the power steering cooler from the vehicle.
Fig 3: Remove Cooler To Radiator Support Bolt
G01479536Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals