LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1337 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Recirculation Door Replacement (Visteon) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the HVAC model assembly. Refer to HVAC Module Assembly Replacement .
  2. Remove the wiring harness from the recirculation housing (1).
  3. Remove the screws from the upper recirculation housing (1).
  4. Remove the upper recirculation housing (1) from the HVAC module assembly (2).
  5. Fig 1: Recirculation Housing & HVAC Module Assembly
    G01479172Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the electrical connector from the recirculation actuator (1).
  7. Remove the screws from the recirculation actuator (1).
  8. Remove the recirculation actuator (1) from the recirculation housing (2).
  9. Fig 2: Remove Recirculation Actuator From Recirculation Housing
    G01479173Courtesy of GENERAL MOTORS CORP.
  10. Remove the recirculation door (1) from the recirculation housing (2).
    Fig 3: Recirculation Door & Housing
    G01479174Courtesy of GENERAL MOTORS CORP.