LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1337 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Recirculation Door Replacement (Visteon) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the recirculation door (1) to the recirculation housing (2).
  2. Fig 1: Install Recirculation Door
    G01479175Courtesy of GENERAL MOTORS CORP.
  3. Install the recirculation actuator (1) to the recirculation housing (2).
    NOTE: Refer to FASTENER NOTICE .
  4. Install the screws to the recirculation actuator (1).

    Tighten 

    Tighten the screws to 2 N.m (18 lb in).

  5. Connect the electrical connection to the recirculation actuator (1).
  6. Fig 2: Recirculation Actuator & Recirculation Hosing
    G01479176Courtesy of GENERAL MOTORS CORP.
  7. Install the upper recirculation housing (1) to the HVAC module assembly (2).
  8. Install the screws to the upper recirculation housing (1).

    Tighten 

    Tighten the screws to 2 N.m (18 lb in).

  9. Install the wiring harness to the recirculation housing (1).
  10. Install the HVAC module assembly. Refer to HVAC Module Assembly Replacement .
Fig 3: Recirculation Housing & HVAC Module Assembly
G01479177Courtesy of GENERAL MOTORS CORP.