Installation Procedure
WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the air deflector to the housing.NOTE: Refer to FASTENER NOTICE .
- Install the retaining screws.
Tighten
Tighten the screws to 1.6 N.m (14 lb in).
- Connect the electrical connectors.
- Install the air deflector assembly to the I/P.
- Remove the knee bolster. Refer to KNEE BOLSTER REPLACEMENT .
- Install the I/P bezel. Refer to BEZEL REPLACEMENT -- INSTRUMENT PANEL (I/P) CLUSTER .