LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1331 (Engine Mechanical (Repair Instructions 2 Of 3) - 5.7L) >> Off-Vehicle Repair Instructions - Part 2 >> Cylinder Boring and Honing >> Boring Procedure

Boring Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. A 0.25 mm (0.01 in) oversize service piston and piston ring set are available for the LS1/LS6 engine.
    2. IMPORTANT: Do not bore the cylinder liners on the LS1/LS6 engine.
  2. It is recommended to hone the cylinder to achieve proper fit for the oversize piston.

    Refer to the Cylinder Honing information for the proper honing procedure.

scientia non olet · About LEMON Manuals