LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Engine Controls - Removal, Overhaul & Installation - Except Diesel) >> Engine Sensors & Switches >> Engine Coolant Temperature Sensor >> Installation

Engine Coolant Temperature Sensor: Installation

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Whenever ECT sensor is removed, coat threads with Sealer (12346004) before reinstallation. Install ECT sensor into engine and tighten to specification. See TORQUE SPECIFICATIONS .
  2. Reconnect harness connector to ECT sensor. Reconnect negative battery cable. Fill and bleed cooling system. See COOLING SYSTEM BLEEDING  under COOLING SYSTEM.
scientia non olet · About LEMON Manuals