Clutch Discs and Plates
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Clean the discs and plates with solvent.
- Inspect the discs and plates for the following:
- Unusual wear, scoring, or grooves on the separator plate friction surfaces (1)
- Friction plates with uneven wear or worn friction material (2 and 3)
If any one plate or disk in either the left or right pack show signs of wear or scoring replace the complete pack on both sides.
- Bent or warped plates or discs
Lay the plates and discs on a flat surface and inspect for warpage
- A worn, scored, or collapsed bellville washer (4)