LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1325 (Propeller Shaft) >> Diagnostic Information and Procedures >> Scraping Noise

Scraping Noise

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Scraping Noise

Cause Correction
Balance weight detached from the propeller shaft A detached balance weight may create a "sliding, scraping, or ticking" type noise during acceleration or deceleration.
  1. Inspect the propeller shaft and tube for a detached balance weight.
  2. Replace components as required. Do not attempt to reattach the balance weight to the propeller shaft.
scientia non olet · About LEMON Manuals