Removal Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the HVAC module. Refer to HVAC Module Assembly Replacement .
- Remove the defroster actuator tie strap.
- Remove the defroster actuator. Refer to Defroster Actuator Replacement .
- Remove the heater door linkage.
- Remove the HVAC case retaining screws.
- Separate the HVAC case halves (1).
- Remove and discard the case seal (2).
- Remove the heater door.