Removal Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the I/P upper trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper in Instrument Panel, Gages and Console.
- Remove the DRL and sunload temperature sensor wire retainers from the windshield defroster duct.
- Remove the windshield defroster duct retaining screws.
- Release the windshield defroster duct from the LH and RH side window lower defogger outlet ducts.
Lift the windshield defroster duct slightly, then use a twisting motion to release from the side window lower defogger ducts.
- Remove the defroster duct.