Clutch Rotor and/or Bearing Replacement (V-7): Notes

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 33023-A Pilot Puller. See Special Tools and Equipment .
J 41552 Compressor Pulley Puller. See Special Tools and Equipment .
J 41790-A Compressor Holding Fixture. See Special Tools and Equipment .
J 33013-B Hub and Drive Plate Remover/Installer. See Special Tools and Equipment .
J 33017 Pulley and Bearing Installer. See Special Tools and Equipment .