LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1301 (Stationary Window System) >> Repair Instructions >> Side Reveal Molding Replacement (Hardtop) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Weatherstrip Retainer & Blow Out Clip
    GM376674Courtesy of GENERAL MOTORS CORP.
  1. Remove the weatherstrip, the weatherstrip retainer, and the blow out clip. Refer to Weatherstrip Side Retainer Replacement (Coupe and Convertible)  or Weatherstrip Side Retainer Replacement (Hardtop) .
  2. Remove the screws attaching the reveal molding.
  3. Remove the side reveal molding.
  4. Clean the mounting surfaces.
scientia non olet · About LEMON Manuals